Singer 1030 Instruction page 9

The Foot
Even Feed
• Guide Even Feed foot into position from back
of machine, making sure the movabie arm
straddies the needie
presser-foot screw secureiy with a coin. To
remove, ioosen screw and guide foot to the
right and away from you.
CHANGING PLATES
(Note; Remove bobbin if it contains thread in
order to prevent thread being caught when
piate is repiaced.)
1. Raise take-up iever to its highest position
by turning the hand wheel toward you.
2. Raise presser foot.
3. Open slide plate. Press down on front edge
of plate and lift up and out.
4. Position new plate over pins and release.
Plate is drawn into position by magnets.
See special instructions on page 30 for
attaching straight-stitch
chainstitching.
5. Close slide piate.
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
ciamp. Tighten
plate for
maszynykrawieckie.shophurt.pl
Movable
Arm
Changing Feed Foot
Even
Removing Needle Piate
Needle
Clamp