Singer 1030 Instruction page 52

Overedged Seam
Stitching Seam
48
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
OVEREDGED SEAMS
• Stitch: Overedge Stretch ^
• Stitch Width: 5 onlyt
• Needle Position:
• Stitch Length: 6 to 8
• Stitch Balance: Equalized
• Speed:
MIN
• Zig-Zag Plate
• Overedge Foot
Seams in knit and stretch fabrics can be
joined and finished in one operation when you
use the overedge stretch stitch.
Procedure
Make a test sample before beginning garment
construction to test machine settings. (See
page 23 for adjusting stitch balance.) Be sure
to duplicate the cut of the garment seam in
your test, and use a bail-point Yellow Band
needle if you are sewing a synthetic knit
fabric.
• Baste the garment together on the seam line
allowing for % inch seam allowance and fit
in usual way.
• After making any necessary adjustments,
trim seam edge evenly to a scant V4inch
from seam line basting.
• Place trimmed seam under the foot so that
the straight stitches fall on the basted seam
line and zig-zag stitches fall over the seam
edge.
tif
a narrower stitch width Is desired, as for seam finishing of fine
fabrics, use the zig-zag foot In place of overedge foot to prevent
needle breakage.
maszynykrawieckie.shophurt.pl