Display Format For Trace Data; Saving Setup File For The Emulator - Fujitsu MB95100 Series Application Note

2. The program is executed and stopped. Right-click the trace window to select
[Refresh] from the shortcut menu. The trace result appears.

4.3.5 Display format for trace data

There are two display formats for trace data:
• Display in order of instruction execution (Instruction)
• Display in source lines (Source)
Use the shortcut menu to switch between the display format for trace data. No trace
stamp is displayed.

4.3.6 Saving setup file for the Emulator

A setup file is not saved automatically until debugging is terminated. When updated,
save the setup file.
Select the [Save...] command from the [File] menu to save the setup file for the
emulator in the Save dialog.
The setup file can be saved only in debug mode.
© Fujitsu Microelectronics Europe GmbH
MB2146-09 – Installation Guide
Chapter 4 Setting up the Emulation Software
- 23 - MCU-AN-395002-E-V10