Tektronix Phaser 840 Networking Setup Manual page 50

7
Windows NT
44
PhaserShare Networking
Creating an LPR port
1.
In the Printer Port dialog box, click the LPR port. If the LPR port is not
listed in the Printer Port dialog box, the Microsoft TCP/IP Printing
Service needs to be added to the Windows NT machine:
a.
In Control Panel, double-click Network; the Network Settings
dialog box appears.
b.
In Network Settings, click Add Software; the Add Network
Software dialog box appears.
c.
In the Add Network Software dialog box, click the drop-down
menu for Network Software. In the list, select TCP/IP Protocol
and Related Components, then click Continue; the TCP/IP
Installation dialog box appears.
d.
In the TCP/IP Installation dialog box, select TCP/IP Network
Printing Support. (Consult your Windows NT documentation for
information on other TCP/IP options.)
e.
Click Continue to install this service. The original Windows NT
distribution diskettes are needed during installation. To apply
these changes, restart Windows NT.
2.
In the Add LPR compatible printer dialog box, enter your printer's IP
address in the field named Name or address of server providing lpd.
In the field named Name of printer or print queue on that server, enter
PS or AUTO in UPPERCASE letters.