Appendix C: Supported Dvi Resolutions; Appendix D: Pip/Pap Mode Combinations - Technika 42-2020 Operating Instructions Manual

Appendix C: Supported DVI Resolutions

When connecting devices to your TV's connectors by using DVI converter cables (not supplied), you can refer
to the following resolution information.

Appendix D: PIP/PAP Mode Combinations

MAIN
TV
DTV/USB
Scart1
Scart2
FAV
HDMI1
HDMI2
YPbPr
PC-VGA
( RGB ): This indicates that, selection is possible only if Scart-1 has a RGB signal.
Restrictions : Scart-1 source must have RGB signal to perform PIP\PAP with sources TV, Scart-2, FAV.
If these sources are set to main window, and Scart-1 does not have a RGB signal, Pip\Pap source can not
be switched to the Scart-1 source.
If scart-1 source is set to main window, and scart-1 does not have a RGB signal, Pip\Pap source can not be
switched to TV, Scart-2 and FAV sources.
24Hz
480i
480p
576i
576p
720p
1080i
1080p
TV DTV/USB Scart1 Scart2
(RGB)
(RGB)
(RGB)
(RGB)
English - 33 -
25Hz 30Hz 50Hz
FAV HDMI1 HDMI2 YPbPr
(RGB) (RGB)
60Hz
PC-
VGA