Tuner; Selecting Tuner; Tuning To A Station; Automatic Tuner - THOMSON AM1550 User Manual

AM1550 EN rev.1 10/29/01

Tuner

Selecting Tuner

1. Select tuner.
2. Press repeatedly to select radio
band.
FM/ MW/ LW

Tuning to a Station

1. Select frequency.
2. Press and hold for a while for
automatic station quick search.
Automatic Tuner Programming (for
FM only)
Press and hold BAND/TUNER button
for 2 second to scan stations. The sta-
tions will then be stored as preset
channels. AUTOMATIC TUNER PRO-
GRAMMING keeps scrolling on display during pro-
gramming which can last for more than a minute.
Maximum 30 stations can be stored. Beware of your
preset channels being erased accidentally because
the scanning and storing process is automatic upon
pressing the button.
You can stop the automatic scan by pressing any but-
ton, but the erased stations cannot be recovered.
AUTOMATIC.
2:17 PM Page 13
Setting Preset Stations
1. Access a desired frequency.
2. Press once, radio band and preset
station number show on display.
3. Select a preset number (1-30).
4. Press to store the selected frequen-
cy with preset station number.

Accessing Preset Stations

Select a preset station in tuner
mode.

Suppressing Stereo Signal

Select between FM mono and stereo
sound for stereo FM stations.
PR 01 FM
9
EN