Random Playback; Program; Editing Program; Clearing The Whole Program - THOMSON AM1550 User Manual

AM1550 EN rev.1 10/29/01
CD Player

Random Playback

EN
1. Start random playback.
2. Stop random playback.

Program

You can create a playback program of up to 20 tracks.
1. While the CD player is stopped,
press PROG/ SET to enter program
mode so that you see 00 PR01 on
display.
OO PR01
2. Select disc tray, you can see select-
ed disc tray number on display.
3. Select disc track.
4. Press to confirm selection or STOP
to cancel selection.
5. Repeat steps 2-4 for further programming.
6. Start program playback.

Editing Program

1. After you have created a pro-
gram, press PROG/SET repeatedly to
review it. (Note: ED means program
is in edit mode)
08 ED01
8
2:17 PM Page 12
2. Press and hold to clear unwant-
ed track. CLEAR shows on display
when completed.
3. Otherwise, repeat steps 2-4 under "Program" to
select a new track.
Tip: at least one CD must be in tray before programming can
be set up.

Clearing the Whole Program

Press and hold until CLEAR shows
on display.

Displaying Disc Details

Press repeatedly to show the follow-
ing disc details during playback.
1) current track elapsed time;
2) current track remaining time;
3) total disc remaining time.
CLEAR
RDS/
01 03:45