Clock And Timer; Setting The Clock; Displaying Clock Time; Setting Timer - THOMSON AM1550 User Manual

AM1550 EN rev.1 10/29/01
Clock & Timer
CLOCK
EN

Setting the Clock

1. Turn on the unit.
2. Press CLOCK twice so that the time
flashes on the display (24-hour clock).
CLK --:00
3. Set the hour
4. Shift to minute digits.
5. Repeat step 3 to set the minute.
6. Press CLOCK to save settings.

Displaying Clock Time

When the unit is off, clock time is always shown on
display.
When the unit is on, you can press CLOCK to display
the current time for about 5 seconds.
Timer
Setting the Timer
1. Press and hold TIMER until ON and clock
time flash on the display ( ON - timer on
time ) (24-hour clock).
ON --:12
2. Set the hour.
6
2:17 PM Page 10
3. Shift to minute digits.
4. Repeat step 2 to set the minute.
5. Shift to audio select.
6. Select among CD, Tuner or AUX (if
available).
7. Shift to disc tray or tuner station select.
8. Select disc tray (if CD is
selected) or preset station (if
TUNER is selected).
9. Shift to volume select.
10. Select volume level.
11. Shift to off time select (OFF shows on dis-
play). Repeat steps 2-4 for setting off time.
12. Press TIMER again to save setting. (Note:
Press TIMER repeatedly to review settings)

Activating the Timer

Press DEMO on the unit to turn on/off the timer.

Sleep Mode

You can select the time interval in
minutes before the unit turns off
automatically. Press SLEEP on the
remote to select among 120, 105, 90, 75, 60, 45, 30,
15 minutes.
VOL 08dB