Troubleshooting; Set Fan Coil Unit Address And Installation Options; Option Setting Procedure And Setting Method (Normal Remote Controller) - Samsung AG026MN1DEH/EU Service Manual

4. Troubleshooting

4-1. Set fan coil unit address and installation options

▶ Set the fan coil unit address and installation option with remote controller option.
Set the each option separately since you cannot set the ADDRESS setting and fan coil unit installation setting option at the same
time.
You need to set twice when setting fan coil unit address and installation option.

4-1-1. Option setting procedure and setting method (Normal remote controller)

4-1-1-1. The procedure of setting option
▶
Option setting
mode
[ 운전선택 ] 버튼
[ 바람 ∧ ] 버튼
[ 바람 ∨ ] 버튼
Entering mode for option setting
Step 1
1. Remove batteries from the remote controller.
2. Insert the batteries while you press [Temp +] and [Temp ‑] button at the same time.
3. Make sure that you are entered to the
Option setting procedure
Step 2
After entering the option setting status, select the option as listed below.
● Option setting is available from SEG1 to SEG 24.
● SEG1, SEG7, SEG13, SEG19 are not set as page option.
caution
● Enter the 2 digits except sequential page option in relevant state. SEG2, SEG3‑‑›SEG4, SEG5‑‑›SEG6, SEG8‑‑›SEG9,
SEG10‑‑›SEG11, SEG12‑‑›SEG14, SEG15‑‑›SEG16, SEG17‑‑›SEG18, SEG20‑‑›SEG21, SEG22‑‑›SEG23, SEG24
SEG1 SEG2
0 X
SEG13 SEG14
2 X
AR-EC00, AR-EH00 Remote controller
Entering mode
for setting option
[ Temp+] Button
[ Temp-] Button
SEG3 SEG4 SEG5 SEG6
X X X X
SEG15 SEG16 SEG17 SEG18
X X X X
mode for setting the option.
SEG7 SEG8 SEG9 SEG10
1 X X X
SEG19 SEG20 SEG21 SEG22
3 X X X
4-1
Option setting
mode
[ Mode] Button
[ Fan ∧ ] Button
[ Fan ∨ ] Button
SEG11 SEG12 On(SEG1~12)
X X
SEG23 SEG24
X X
Trouble shooting
Off(SEG13~24)