4-1-2. Option setting procedure and setting method (360 cassette remote controller only)
4-1-2-1. The procedure of setting option
Entering the mode for
settingthe options
[Options] Button
[Timer] Button
Enter the mode for setting the options
Step 1
a. Remove batteries from the remote controll.
b. While holding down the
control.
c. Make sure that you are entered to the mode for setting the options:
Step 2
Set the option values.
The total number of available options are 24: SEG1 to SEG24.
●
Because SEG1, SEG7, SEG13, and SEG19 are the page options used by the previous remote control models,the
●
caution
modes to set values for these options are skipped automatically.
Set a 2‑digit value for each option pair in the following order: SEG2 and SEG3 → SEG4 and SEG5
●
→ SEG6 and SEG8 → SEG9 and SEG10 → SEG11 andSEG12 → SEG14 and SEG15 → SEG16 and SEG17 →SEG18 and
SEG20 → SEG21 and SEG22 → SEG23 and SEG24
SEG1
SEG2
SEG3
0
X
SEG13
SEG14
SEG15
2
X
(Temp) and
SEG4
SEG5
SEG6
X
X
X
X
SEG16
SEG17
SEG18
X
X
X
X
(Timer) buttons simultaneously, insert the batteries into the remote
SEG7
SEG8
SEG9
SEG10
1
X
X
X
SEG19
SEG20
SEG21
SEG22
3
X
X
X
4-5
Setting theoption values
Round Wheel
On(SEG1~12)
Off(SEG13~24)
SEG11
SEG12
X
X
SEG23
SEG24
X
X
Trouble shooting