BOMBARDIER SeaDoo Speedster 200 Operator's Manual page 90

.
PROPULSION
Propulsion system
Number of jet pumps
Jet pump type
Transmission
Impeller shaft reservoir, oil type
Pivoting angle of direction (nozzle)
Minimum required water level
for jet pump(s)
DIMENSIONS
Overall length
Overall length on trailer
Beam
Draft
Dead rise
Overall height
Overall height on trailer
Weight (dry)
Load limit (passengers + luggage)
Hull material
CAPACITIES
Fuel tank (reserve included)
Impeller shaft reservoir
Oil capacity (per engine)
BOMBARDIER reserves the right to make changes in design and specifications
and/or to make additions to, or improvements in its products without imposing
any obligation upon itself to install them on its products previously manufactured.
Capacity
Oil level
SPEEDSTER 200
Bombardier Formula Pump
2
Axial flow, single stage
Direct drive
Jet Pump Bearing Grease
~ 26°
90 cm (3 ft)
6.02 m (19 ft 9 in)
7.08 m (23 ft 3 in)
2.44 m (8 ft 0 in)
30 cm (12 in)
20°
1.42 m (4 ft 8 in)
1.88 m (6 ft 2 in)
1256.5 kg (2770 lb)
7 passengers OR 635 kg (1400 lb)
(based on calm water operation)
Composite (fiberglass)
151 L (40 U.S. gal)
80 mL (2.7 U.S. oz)
Up to plug
3.5 L (3.7 U.S. qts)
91