Start/Stop Buttons - BOMBARDIER SeaDoo Speedster 200 Operator's Manual

WARNING
Only use reverse at slow speed
and for the shortest time possible.
Always ensure the path behind is
clear of objects and persons in-
cluding children playing in shal-
low water.
CAUTION: Never rev the engine at
high RPM in reverse.

5) Start/Stop Buttons

Dual function push switches. Used to
start as well as to stop engines.
F13H01Y
TYPICAL — START/STOP BUTTONS
1. For port engine
2. For starboard engine
Starting
Shifter must be in neutral position and
the safety lanyard must be on the
DESS post to allow starting engines.
To start engines, press and hold each
button. Release immediately after
each engine is started. Proceed the
same way for the other engine. Only
one engine at a time can be started.
40
1 2
1
F04H0AY
1. Start when engine is NOT running
Stopping
WARNING
While engines can be stopped by
pressing the stop buttons, we
strongly recommend stopping the
engines by removing the safety
lanyard. This will instill good hab-
its.
Pressing either button when engines
are running will stop that engine.
1
F04H0AY
1. STOP when engine IS running
WARNING
Directional control is not available
when engines are stopped.