BOMBARDIER SeaDoo Speedster 200 Operator's Manual page 57

.
Engine ignition timing if required
Spark plug inspection, cleaning and adjustment
Fuel system lines and fasteners/pressurization test
Cooling system coolant levels
Oil lines and filter
Engine support and engine rubber mounts
Muffler, battery and reservoir fastening devices
Exhaust system hose clamps torque
Steering system
Steering cable adjustment if required
Shifter cable adjustment if required
Ensure that throttle lever
necessary
Hose condition and fasteners
Bilge pump and bilge blower
DESS system and start/stop buttons operation
Monitoring beeper
Electrical connections (starter, battery, etc.)
Lighting system inspection
Impeller shaft reservoir oil replacement
Torque jet pump retaining nuts
Impeller condition, impeller/wear ring clearance
Water intake grates/ICS (Inlet Clearance System/hull condition
Inspection of fasteners for tightness
Inspect/clean engine drain tube
NOTE: Inspection applies for both engine systems.
We recommend that this inspection chart be signed by an authorized dealer.
Date of 10-hour inspection
10-HOUR INSPECTION CHECK LIST
s
keep the selected position. Adjust lever tension as
Authorized dealer signature
Dealer code

57