Load Paper - Epson L1300 Start Here

L1300
Start Here
1
Unpack
Note: The ink bottles and printer cables may be packed inside the product.
The included ink bottles must be used for product setup and are not for resale.
2
Fill ink tanks
Note: This product requires careful handling of ink. Wear plastic gloves and place a
sheet of paper under the ink tank unit when you fill or refill the ink tanks, as ink may
splatter. If ink spills, wipe it off immediately to avoid permanent stains. If ink gets on
your clothes or belongings, it may not come off.
3

Load paper

Caution: Do not open the ink bottles until you are ready to fill the ink tanks. The ink
bottles are vacuum packed to maintain reliability. Never place the product on its side
after the ink tanks are filled.
Warning: Keep ink bottles out of the reach of children and do not drink the ink.
Caution: Replace bottle cap tightly, or
ink may leak.
Press the power button and
wait until the power light
stays on.
Read these instructions before using your product.
During initial setup, make sure to use the ink
bottles that came with your product and use all
of the ink.
Fill each tank with the correct ink color.
Check position.
Press and hold the
seconds until the
flashing. Ink charging takes approximately
22 minutes. Ink charging is complete when
the power light stays on.
22 minutes
English
ink button for 3
power light starts