Changing The Rear Wiper Blade - Acura MDX 2020 Owner's Manual For Quick Reference

MAINTENANCE
4. Slide the wiper blade out of the holder
by pulling the tabbed end out.
5. Remove the retainers from the wiper
blade that has been removed, and
mount to a new wiper blade. Correctly
align the wiper blade protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the
holder from the bottom end. The tab
on the holder should fit in the indent of
the wiper blade.
7. Slide the wiper holder onto the wiper
arm, then push down the lock tab.
8. Lower the passenger side wiper arm
first, then the driver side.
Avoid dropping the wiper arm onto the windshield, it may damage the wiper
arm and/or the windshield.
176 |
n

Changing the Rear Wiper Blade

1. Raise the wiper arm off.
2. Slide the wiper blade out from the
end with the indent.
3. Remove the retainers from wiper
blade and mount to a new rubber
blade.
MAINTENANCE
| 177