VEHICLE CONTROLS
*1
n
Second Row Seat Heaters
The power mode must be in ON to use
the seat heaters.
Press the seat heater button:
• Once - The HI setting (three indicators on)
• Twice - The Mid setting (two indicators on)
• Three times - The LO setting (one indicator on)
• Four times - The OFF setting (no indicators on)
Do not use the seat heaters even in LO when the engine is off. Under such
conditions, the battery may be weakened, making the engine difficult to
start.
After a certain period of time, the strength setting for the seat heaters will
automatically be reduced by one level at a time until the seat heater shuts
off. The elapsed time varies according to the interior environment.
Heat-induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with
diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin
should not use the seat heaters.
Customized Features
When you customize settings, make sure that the vehicle is at a complete stop
and shift to Park (P).
70 |
Using the Information Screen
n
To Change a Setting
Using the Information Screen
1. Press the SETTINGS button.
2. Rotate the interface dial to view categories.
3. Press the interface dial to select.
*1 - If equipped
VEHICLE CONTROLS
| 71