Setting And Using The Oven Programmer/Timer; Setting The Time Of Day And Selecting Manual Operation Mode; Before First Use - Baumatic P640SS Instruction Manual

Setting and using the oven programmer/timer

Setting the time of day and selecting manual operation mode

After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash 00.00.
Before you can select a cooking function or set a temperature,
you must set the appliance into "manual operation" mode and
set the time of day.
o To select manual operation mode, press the duration and
cooking end time buttons simultaneously.
o The "AUTO" symbol will disappear from the timer display and the
"manual operation" symbol (4) will appear instead.
o Use the timer plus and minus buttons to adjust the time that
appears in the timer display. The speed at which the time
adjusts is dependant at how hard you press the buttons.
o When the time shown in the timer display is correct, release the
plus and minus buttons. After 7 seconds, the decimal point on
the timer display will stop flashing and the time of day will be
set.

Before first use

o To remove any residue from the oven that may have been left
from the manufacturing process, you should select either the fan
or conventional oven function and turn the thermostat dial to its
maximum temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave the oven on maximum setting for 30 – 40
minutes.
11