Table of Contents
Advertisement
Setting and using the oven programmer/timer
Selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
you can select a cooking function or set a temperature, you
must set the appliance into manual operation mode.
o To select manual operation mode, press the manual operation
button (7) on the control panel.
Setting the time of day
After setting your oven for manual operation, you should also
set the time of day.
o Use the minus button (8) and plus button (9) to adjust the time
that appears in the display. After getting the display to the
correct time, release the minus and plus buttons. After a few
seconds the time will fix in the display and you will be able to
use your oven.
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select either the fan
or conventional oven function and turn the thermostat dial to its
maximum temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave the oven on maximum setting for 30 – 40
minutes.
13
Advertisement
Table of Contents
