Operation; Starting / Stopping; General Operation; Ipower Speed Indicator - Craftsman 151.98834 Operator's Manual

60v max lithium-ion cordless mower
Hide thumbs Also See for 151.98834:
Table of Contents

Advertisement

Available languages

Available languages

STARTING / STOPPING

See Figures 20-22, page v
■ To start motor, insert the safety key (19)
in the battery compartment and close
compartment cover.
■ Press in the safety button (2) with one
hand, and with other hand pull back the start/
stop bale switch (1). The safety button will
remain depressed.
■ To stop the mower motor, release the start/
stop bale switch (1). Remove the safety key
from the battery compartment if the mower is
not going to be used immediately.

iPOWER SPEED INDICATOR

See Figure 18, page iv
Located on upper mower handle
■ By default the motor power is set to AUTO
to automatically adjust to variations in lawn
texture as you mow. However, you may
set the motor power to one of three fixed
settings.
■ Press the Speed button to cycle through
the different motor power levels.
• Set the motor power to 1, if your lawn
needs only light mowing.
• Set it to 2, if you are going to mow taller
and thicker grass.
• Set it to 3 to utilize the maximum motor
power for mowing the most stubborn grass.
iPOWER CHARGE INDICATOR
See Figure 18, page iv
■ Press the Charge button to check on the
battery status.
■ The number of lights lit will indicate
the remaining charge left in the battery.
CAUTION
A flashing LED on the cutting mode control
panel indicates that the current is too high.
A flashing LED on the battery indicates that
the voltage is too low. In either case the
motor will be shut down automatically. Do not
continue to activate the On/Off switch if the
motor has been shut down automatically. The
battery may be damaged.

OPERATION

GENERAL OPERATION

Check the mower before each use to make
sure that no components are damaged
and that all power connections are secure.
If damage is present, replace damaged
components before further use.
■ Double check that the blade is properly
installed.
■ Always operate the mower with both hands
on the handle. Keep the handles dry so that
hands do not slip off.
■ Switch the product off immediately if you
are disturbed while working by other people
entering the working area. Always let the
product come to complete stop before
removing the grass collection bag.
■ Do not overwork yourself. Take regular
breaks to ensure you can concentrate on the
work and have full control over the mower.
17 ― English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents