All manuals and user guides at all-guides.com
CLT9960 2nd
6/30/00
6:42 PM
ADDITIONAL
Changing the digital security code
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set.
(See page E2.)
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
Note:
If the handset battery pack is completely discharged or the battery pack is removed, the
digital security code will be lost. If this happens, a new security code is set automatically
the next time the battery pack is charged.
Page 45
INFORMATION
1
Remove the handset from the base unit. Press and hold
PAGE/FIND.
2
While holding PAGE/FIND, return the handset on the base
unit. The paging stops.
Leave the handset on the base more than 3 seconds.
A new security code is set.
E41