Handsfree Speakerphone In The Handset; Dialing From Talk Mode - Sanyo CLT-9960 Instruction Manual

All manuals and user guides at all-guides.com
CLT9960 3rd 7/12/00 6:49 PM
BASICS

HandsFree Speakerphone in the Handset

• Press SPEAKER during a call to switch to HandsFree
conversation using the handset speakerphone.
• Press SPEAKER again to end the call.
• Press TALK/END to return to normal conversation using
the earpiece speaker.
E12
Page 16

Dialing from talk mode

1
Press TALK/END or SPEAKER.
Press TALK/END
Talk
The volume setting is displayed.
For example, if the volume is set to high, the display shows:
Talk
<High>
The call-time display appears.
2
Dial the phone number.
Example: Enter 9057609944
Talk 0:17
9057609944
3
To hang up, press TALK/END or SPEAKER
handset in the base). The call time display remains for about
5 seconds after disconnection.
10:03
Note:
Repeated short chargings may cause memory effect in the battery
pack, which reduces use time of the battery. It is recommended
not to replace the handset to the base unit after each call.
Talk
flashes on the display.
Press SPEAKER
Talk
Talk
<High>
Talk 0:17
9057609944
(or place the