Setting The Automatic Answering; Setting The Incoming Call Rejection; Setting The Standby Screen; Setting The Automatic Connection - Pioneer DEH-P70BT Operation Manual

Hands-free phoning
2 Press Multi-Control to select the desired
ring alert.
Press Multi-Control repeatedly to switch be-
tween the following settings:
OFF (ring alert off)BEEP 1 (ring alert 1)
BEEP 2 (ring alert 2)BEEP 3 (ring alert
3)
Setting the automatic
answering
If you set the automatic answering function
on, hands-free answering to incoming call is
possible.
1 Use Multi-Control to select
Auto answer.
Auto answer is displayed.
2 Press Multi-Control to turn automatic
answering on.
Auto answer ON appears in the display.
# To turn automatic answering off, press
Multi-Control again.
Setting the incoming call
rejection
You can reject an incoming call.
! Even if you rejected an incoming call, it is
recorded as a call register.
1 Use Multi-Control to select Refuse calls.
Refuse calls is displayed.
2 Press Multi-Control to turn automatic
call rejection on.
Refuse calls ON appears in the display.
# To turn automatic call rejection off, press
Multi-Control again.
All manuals and user guides at all-guides.com

Setting the standby screen

It is possible to select a standby screen from
movie, picture or off.
1 Use Multi-Control to select Background.
Background is displayed.
2 Push Multi-Control left or right to select
the desired standby screen.
Each time Multi-Control is pushed left or
right, one of the following is selected:
Background OFF (OFF)BACKGR.Video ON
(movie)BACKGR.Pict ON (picture)
Note
Selected item in Using different entertainment dis-
plays on page 83 doesnt reflect this function.
Setting the automatic
connection
It is possible to set the automatic connection
between your cellular phone and this unit. If
this function is set to on, connection between
your cellular phone and this unit will take
place automatically as soon as the two devices
are less than a few meters apart.
! With some cellular phones, it may not be
possible to perform the automatic connec-
tion.
1 Use Multi-Control to select
Auto connect.
Auto connect is displayed.
2 Press Multi-Control to turn automatic
connection on.
Auto connect ON appears in the display.
# To turn automatic connection off, press
Multi-Control again.
Section
08
49
En