Repeating Play; Playing Tracks In A Random Order; Scanning Folders And Tracks - Pioneer DEH-P70BT Operation Manual

Section
07 MP3/WMA/AAC/WAV Player

Repeating play

For MP3/WMA/AAC/WAV playback, there are
three repeat play ranges: Folder repeat (folder
repeat), Track repeat (one-track repeat) and
Disc repeat (repeat all tracks).
1 Use Multi-Control to select Play mode.
Play mode appears in the display.
2 Press Multi-Control to select the repeat
range.
Press Multi-Control repeatedly until the de-
sired repeat range appears in the display.
! Disc repeat  Repeat all tracks
! Track repeat  Repeat just the current
track
! Folder repeat  Repeat the current folder
Notes
! If you select another folder during repeat play,
the repeat play range changes to Disc repeat.
! If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Folder repeat.
! When Folder repeat is selected, it is not pos-
sible to play back a subfolder of that folder.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range,
Folder repeat and Disc repeat.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Use Multi-Control to select
Random mode.
Random mode appears in the display.
34
En
All manuals and user guides at all-guides.com
3 Press Multi-Control to turn random
play on.
Tracks will play in a random order within the
previously selected Folder repeat or
Disc repeat ranges.
# To turn random play off, press Multi-Control
again.

Scanning folders and tracks

While you are using Folder repeat, the begin-
ning of each track in the selected folder plays
for about 10 seconds. When you are using
Disc repeat, the beginning of the first track of
each folder is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Use Multi-Control to select Scan mode.
Scan mode appears in the display.
3 Press Multi-Control to turn scan play
on.
The first 10 seconds of each track of the cur-
rent folder (or the first track of each folder) is
played.
4 When you find the desired track (or
folder) press Multi-Control to turn scan
play off.
The track (or folder) will continue to play.
# If the display has automatically returned to
the playback display, select Scan mode again by
using Multi-Control.
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.