Troubleshooting Guide - Memorex MCC228RSBLK User Manual

If you experience a problem with this unit, check the chart below before calling for service.
Symptom
Unit will not turn on.
Images/pictures are poor
quality.
All manuals and user guides at all-guides.com

TROUBLESHOOTING GUIDE

Possible Cause
Power is off.
Battery pack is weak or dead.
Poor lighting.
Lens is dirty.
Subject too close.
Subject or unit moved as picture was
taken.
Subject is too far away.
Resolution is set too low.
White balance is not set properly.
Solution
Press the Power button for one
second to turn on.
Recharge the battery pack.
Take picture in better lighting
and/or adjust the EV setting.
Clean lens with a soft cloth.
Rotate the Macro ( /
the Up ( ) position.
Hold unit steady until picture is
taken.
Rotate the Macro ( /
the Down (
Set to a higher resolution, see
page 34.
Set White Balance to reflect the
environment you are in.
65
) switch to
) switch to
) position.