Notes on error messages and errors
The error message from the dryer are displayed on the operating panel. The
controller manual provides appropriate information. You are given information on
the possible causes for the error and tips how to eliminate the error.
If the dryer is connected to a fault signalling system, all error messages are
transmitted through the potential-free busbar connection to the operator's control
room.
Also heed the following notes when working at the electric system:
Electric current warning!
Work on the electrical system must only be carried out by qualified
technical personnel! The electropneumatic switch cabinet in particular
must be opened and serviced by an instructed trained electrician only.
Caution!
Arbitrary changes to the factory settings of the control programme may
result in damage to the dryer.
56
WVM_BASIS_EN_03—07/2016