Setting The Start And End Time Function - Baumatic P670SS Instruction Manual

Setting the start and end time function

This function will allow you to set a time in the future that the
will oven switch on at and a time that the oven will switch off
at.
o Press the oven ON/OFF button (9) and release it.
o Select an oven function by using the oven function selection
buttons (7).
o Once the display shows the oven function that you require, press
the confirmation button (6) to confirm your choice.
o Each oven function has a preset temperature assigned to it,
however it is possible to adjust this preset temperature using the
oven function thermostat buttons (1).
o Use the programmed cooking time selection buttons (3) to set
the length of time that you want the oven to cook for.
o After selecting the cooking time, use the oven setting selection
buttons (5) until "end of cooking" appears on the display. Press
the confirmation button (6) to confirm your choice.
o Use the programmed cooking time selection buttons (3) to set
the time of day that you want the oven to switch off at. Press the
confirmation button (6) to confirm your choice.
o A message will appear on the display every 15 seconds, showing
the time remaining until the oven switches on.
o If you want to modify the timings that you have set, then use
the programmed cooking time selection buttons (3).
o If you want to delete the programmed cooking time, press the
oven setting selection buttons (5) simultaneously.
o When the countdown is complete, the oven will emit an acoustic
signal for 5 minutes. To silence this signal, press any key apart
from the oven ON/OFF button (9).
o Important: You cannot use the defrost function with the start
and end time function.
14