Connections; Audio Equipment; Connecting Analog Audio Equipment; Connecting Digital Audio Equipment - Tascam MD-CD1 Owner's Manual

Tascam owner's manual minidisc deck/cd player md-cd1

Hide thumbs Also See for MD-CD1:

Table of Contents

3 – Connections

Before connecting the MD-CD1 to other units,

please read their operation manuals thoroughly to

ensure proper connection. Turn the power on only

after all connections have been made.

Connect analog stereo ampliﬁers, mixers and record-

ers to the analog line inputs and outputs. There are

input terminals for the MD deck recording source

and terminals for both the CD and MD outputs, as

well as a COMMON output for the output signals of

the CD deck, the MD deck, or both. Selection of

either or both deck's output signals can be performed

on the SYSTEM sub-menu of the CD menu under

the "COMMON?" option.

TASCAM MD-CD1 Owner's Manual

NOTE

• The optional LA-MC1 Balanced Analog Input/

Output Board can be installed to enable the MD-

CD1 to be used in a balanced system.

• Connection cables are not supplied with this unit.

• Do not bundle the pin connection cords with the

power cord as noise or diminished sound quality

could result.

Digital stereo ampliﬁers, mixers and recorders can be

connected through the optical digital input/output

terminals.

This unit has been designed to operate on the speci-

ﬁed power voltage only. Do not plug the power cord

into outlets of any other voltage.

Table of Contents