Advertisement
TOC EDIT
Track 2
DIVIDE
Track 5
Track 6
COMBINE
Track 9
Track 10 Track 11
ERASE TRACK
Track 5
StartPt SET
Track 5
End
ALL CANCEL?
Analog and digital source volume
REC MENU 1
TASCAM CD-RW402 Quick Start guide
Track 2
Track 3
Track 5
Track 9
Track 10
Track 5
Track 5
Pt SET
DIG VOLUME
2
Turn the
MULTI DIAL
ing options, and push it to carry out the
operation.
Sometimes you may need to confirm the
operation by pressing the
3
Divide a track into two at the current
position.
4
Combine two tracks.
5
Erase a track from the TOC
6
Move the start of the track or the end of the
track to the current playback position.
7
Return the disc to "normal" by ejecting it, or
the
menu option (when the drive
ALL CANCEL
is stopped.
1
When recording from an outside source on
drive 2, use the
INPUT SELECTOR
between the digital
nectors, the
ANALOG
(drive 1).
2
Adjust the level of analog signals (and their
balance) using the
controls.
3
Use the
REC MENU 1
volume to set the level of all signals (analog
post-step 2, and digital).
Adjust the level between -
(there is also an "off" setting, shown by ---).
to select the TOC edit-
again.
MULTI DIAL
to choose
or
con-
COAXIAL
OPTICAL
connectors, or
INTERNAL
and
INPUT
BALANCE
menu to select the digital
and
60
+18 dB
Advertisement
