Advertisement
TASCAM CD-RW402 Quick Start guide
Copying discs (disc at once)
DISC AT ONCE
Lead In 1:12
1
1:56
01
LeadOut 0:23
COMPARE21:45
TOC EDIT
TOC EDIT
COPY>
DAO
CopySpeed>x4
COMPARE > NO
COPY START ?
?
1
Insert the source disc into drive 1 and a
blank recordable disc.into drive 2
Close both drive trays.
2
Press the
DISC COPY
The display shows
a data disc is being copied.
NOTE that the procedure for audio discs is
slightly different—see the manual for
details.
3
Press the
MULTI DIAL
Turn the
MULTI DIAL
speed (1x, 2x or 4x).
Push the
MULTI DIAL
4
Turn the
MULTI DIAL
compare the two discs after the contents of
the source disc have been copied to it.
Press the
MULTI DIAL
5
Press the
MULTI DIAL
process.
6
After a brief standby period, the lead-in is
written, the copy process continues, and the
time so far (at normal speed) is shown.
The disc will be finalized (
data has been copied.
If you have selected the compare option, the
discs will be compared following the finali-
zaison.
1
When an audio disc is in drive 1, it is possi-
ble to edit the TOC so that tracks are joined,
split or removed, and the start and end times
of tracks can be shifted.
This applies only to the TOC, not the mate-
rial actually recorded on the disc.
With the drive in play or ready mode, press
(1), turn the
MENU
, and press the
TOC EDIT ?
key.
/
DISC AT ONCE
COPY> DAO
(2).
(2) to select the copy
to confirm the setting.
to select whether to
to confirm the setting.
to start the copy
) after the
Lead Out
to display
MULTI DIAL
.
MULTI DIAL
if
Advertisement
