Assembling The Attachments - Morphy Richards Accents Manual

48952MEE Rev8_MR Instruction Books 13/11/2013 09:10 Page 5
g
Getting the best from your new appliance...
Safety
Take care when handling blades they are very sharp.
Operation
The hand blender is designed for intermittent use. Do not use
non stop for more than 1 minute at a time. Allow to cool down
for a minimum of 5 minutes before further use.
WARNING: Do not blend in the chopping bowl or
damage will occur to the blender blade and spindle.
Use the plastic measuring beaker provided.
Your hand blender is designed to help you
prepare everything from soups to chocolate
mousse, crush ice quickly
and chop a variety of food with
minimal effort.
The hand blender can be used with the
measuring beaker or a saucepan.
Features
⁄ Blender leg
¤ Release button
‹ Blender body
› Turbo switch
fi On/off switch
fl 8 Speed control
‡ Whisk gearbox
· Whisk attachment
‚ Chopping bowl base
(also storage bowl lid)
„ Chopping bowl
‰ Chopping bowl operating lid
 Chopper blade
Ê Wall mounting bracket
Á Wall mounting screw and
wall plug x2
Ë Plastic Measuring beaker with storage lid
Unpacking your hand blender
WARNING: Carefully unpack your hand blender, blades are
very sharp.
Wash all parts before first use, see cleaning instructions section.

Assembling the attachments

Insert by pushing the blending leg, whisk gearbox or the chopping
bowl lid into the blender body, until it clicks into place.
To remove the attachment press the release button.
Using the hand blender
WARNING: Make sure that the hand blender is switched off
and unplugged from the mains.
1 Clean the blending attachment before using it for the first time with
a damp cloth.
2
Insert the blending leg into the main housing and click into place
A.
3 The hand blender can now be plugged in and is ready to use.
WARNING: Do not blend in the chopping bowl or damage will
occur to the product. Use the plastic measuring beaker.
4
Place the blending leg into the food to blend, select the required
speed for your food on the speed control, then press the on/off
button B.
Release the on/off to stop blending.
5 After use, unplug the blender and remove the blending leg by
pressing the release button and pull gently away.
6 Give the blending leg a rinse with cold water. If the main body has
been splashed just give it a wipe with a damp cloth.
WARNING:Your hand blender is designed for intermittent
use. Do not use non-stop for more than 1 minute. Allow to
cool down for a minimum of 5 minutes before further use.
Using the chopper attachment
The chopper attachment can be used for meat, hard cheese, nuts,
herbs, boiled eggs, dry bread etc.
WARNING: Blades are very sharp.
1
Place the chopping bowl onto the chopping bowl base. This will
prevent the jug from slipping C.
2 Fit the chopping blade into the chopping bowl D.
3 Add food to be chopped.
4 Place the chopping lid on top, making sure that it is correctly fitted
on the chopping blade E.
5 Place the blender body onto the top of the chopping bowl lid until it
has clicked into place.
6 Plug the blender into the mains socket and press the on/off switch,
holding the blender and jug firmly on the work surface.
Note:Your hand blender is not suitable for grinding coffee beans.
When chopping meat ensure that all the bones have been
removed, before adding to the bowl.
Using for Ice crushing
The blender leg is fitted with a special blade suitable for crushing
ice. It can be used to crush ice cubes to produce fine ice for
cocktails, cold drinks etc.
1 Place a maximum of 4 ice cubes in the plastic measuring beaker.
2
Press firmly down on the ice cubes with the blender using a
plunging action until the ice cubes are fine ice pieces.
g
f
d
e
h
p
i
q
s
}
≈
∂
t
5