Playing Back Cassette Tapes; Preparation For Tape Playback; Selecting The Reverse Mode; Turning Dolby Nr On And Off During Playback - Tascam CD-A550 Owner's Manual

This chapter explains the playback functions of this unit's
cassette recorder. The following explanation assumes
that this unit's power is ON and that a cassette tape with
a recorded signal has been loaded with the A side facing
forward.

Preparation for tape playback

Selecting the reverse mode

Use the switch to set the reverse mode.
REV MODE
REV MODE switch
: Repeat playback of both A and B sides five times
ä
: Play both A and B sides once each and then stop
Ë
playback
: Play either the A or the B side once and then stop
ï
playback

Turning Dolby NR ON and OFF during playback

To play a tape recorded using Dolby B noise reduction, turn
the switch ON before playback.
DOLBY NR
DOLBY NR switch
Use the same Dolby B noise reduction ON/OFF setting as
was used during recording.
6 – Playing Back Cassette Tapes

Playing a tape

Press the [ ] key on the main unit or the
TAPE PLAY
Á
remote control to play the A side or the
key to play the B side.
TAPE PLAY key
You can play both a CD and a cassette tape at the same
time.
Stopping playback
ª
Press the key.
TAPE STOP
TAPE STOP key
TASCAM CD-A550/CD-A750
TAPE PLAY [ ]
Ó
TAPE PLAY key
35