Dometic DM20D Installation And Operating Manual page 17

DM20 Installation
6.5 Mounting the lock (no lock version only)
Disassembling the drawer (fig. 7, page 7)
➤ Open the drawer completely.
➤ Press the rail lock (A 1).
➤ Pull the drawer out of the cabinet.
➤ Remove the gasket (B 1).
➤ Remove the lock cover (B 2).
➤ Remove the plugs (C 1) from the screws of the door handle (C 3).
➤ Unscrew the screws (C 2) of the door handle (C 3).
➤ Remove the door handle (C 3).
Drilling the holes (fig. 8, page 7)
➤ Drill a hole with a diameter of 25 mm through the decor and the door (A 1).
➤ Unscrew the screws (B 1) of the decor frame (B 2).
➤ Remove the decor frame (B 2).
Assembling the lock (fig. 9, page 8)
➤ Put the new lock cover (A 1) into place.
➤ Put the decor (B 1) into the decor frame (B 3).
➤ Screw the decor frame (B 3) onto the door (B 2).
➤ Install the door lock (C 1).
➤ Install the lock catch in the cabinet (D 1).
Assembling the drawer (fig. 0, page 8)
➤ Push the gasket (1) on the decor frame (2).
➤ Screw the door handle (4) onto the door.
➤ Push the plugs (3) on the screws of the door handle (4).
➤ Push the drawer into the cabinet.
17
EN