Dometic DM20D Installation And Operating Manual page 12

Safety instructions
A
NOTICE!
• Connect the device with the 230 V connection cable to the 230 V AC
mains supply.
• Check that the voltage specification on the type plate corresponds to
that of the energy supply.
• The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
• Never pull the plug out of the socket by the cable.
2.2 Operating the device safely
!
CAUTION!
Health hazard
• Opening the door for long periods can cause significant increase of
the temperature in the compartments of the device.
• Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
• Store raw meat and fish in suitable containers in the device, so that it is
not in contact with or drip onto other food.
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the door open to prevent mould developing within the
device.
A
NOTICE!
• Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for the purpose.
• Do not place the device near naked flames or other heat sources
(heaters, direct sunlight, gas ovens etc.).
• The device is designed for built-in installation only, not for free-
standing installation.
• Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
arises during operation does not build up. Make sure that the device
is sufficiently far away from walls and other objects so that the air can
circulate.
12
DM20
EN