Targus Mobile Docking Station User Manual page 18

Verifying a Serial Modem Connection
When attaching a modem to the serial (RS232) port,
verify that the port assigned to your modem is Serial USB
(COMx), where x is the number of the COM port.
If the operating system does not detect automatically that
your modem is assigned to Serial USB (COMx), run the
Hardware Wizard again and choose
instead of
as the COM port.
Error Message on Your PDA
If the error message "Connection Not Established"
appears on your PDA, check that the COM port setting in
either your HotSync or ActiveSync software matches the
setting on the docking station. See "Verifying Devices
are Installed" on page 17 to verify the COM port setting
on the docking station.
Some older versions of the Palm
not compatible with the USB to Serial conversion. Please
contact your PDA vendor for software updates.
Video
Can I get a higher resolution on my
monitor?
• No, resolution is set at 1280 x 1024, 16-bit colour.
Can disk
extensive reading and writing to an
external hard drive or DVD, degrade
video functionality?
• Yes. Since all data has to pass through a single USB
connection, you may notice some degradation of your
video performance. Video performance will return
when disk read/write decreases or stops.
. Then, select
I/O functions
from the list
®
Desktop software are
such as,