Connecting The Mouse To Your Computer; System Requirements - Targus Screen Scroller Mouse User Manual

System Requirements

To use the mouse, your computer must meet the following
hardware requirements and run one of the operating systems
listed below.
Hardware
• PC with a Intel
or equivalent and a hard disk drive
• 64 MB RAM or higher, depending on
the operating system
• USB version 1.1 interface
or PS/2 port
Connecting the Mouse to Your
Computer
Depending on the operating system you are running, you can
connect the mouse to either your computer's USB port or,
using the supplied PS/2 adapter, you can connect the mouse to
your computer's PS/2 port.
Connecting the Mouse to the USB Port
NOTE: If you are running the Windows NT
you must connect the mouse to your computer's PS/2 port.
See "Connecting the Mouse to the PS/2 Port."
To connect the mouse to an available USB port:
1 Turn off your computer.
2 Plug the standard USB end of the cable into an available
USB port on your computer.
You are now ready to install the device drivers for your
operating system.
® ®
Pentium processor
3
Operating System
®
• Windows 98/Me/
2000/XP
• Windows NT
(PS/2 only)
• Mac OS X and higher
(USB only)
®
operating system,
®