How to Play iPod How to Set Alarm & Time How to Mute the System Installing Battery in the Remote Control Notes about the Remote Control Trouble Shooting Package Contents 1.Main unit 2.Owner's manual 3.AC adapter 4.Remote control 5.RCA audio cables PHSI50B...
Dear customers: Thank you for purchasing the 2.1 channel music center system. We strongly recommend that you carefully study the operating instructions before attempting to operate the unit and that you note the listed safety information. Safety information: 1. This unit can be used only where the power supply is in accordance with the notes on the rear panel of the unit.
LCD Display System 4. IPod Control Menu 1. Source Select Menu 5. Mute Control Menu 2. Tone Control Menu 6. Time and Alarm Control Menu 3. Tuner Control Menu...
Operation instructions How to power up the system Connect the AC adaptor, then turn on the power. How to play stereo audio Press the " " key on the remote control to choose the input mode "iPod, AUX, FM, AM". How to use sleep mode Sleep mode lets you sleep to your system at the selected time.
Multi-function Control Area " " : Select the following four submenu: <tone>, <time>, <alarm>, <source>. Or enter to the next menu. 2. " ": Return to the previous menu. " " : Adjust settings. For example: a. When you want to set the time, press the "...
" " : Selects the previous file of the iPod player. " " : Selects the next file of the iPod Player. " " : Selects the iPod player to return to the previous submenu. " " : Controls the iPod player to enter next submenu. "...
4. How to play iPod using one key control system i). Press the knob to enter the first-level sub-page (control panel). ii). Choose iPod Control Menu , you can press knob to enter second-level sub-page (see the picture on " "...
Page 10
CAUTION: DO NOT REMOVE BACK COVER OF UNIT DUE TO THE POSSIBILITY OF ELECTRICAL SHOCK. THERE ARE NO SERVICEABLE PARTS INSIDE THIS SECTION. PLEASE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with an equilateral triangle, Dangerous Voltage , is intended to alert the user to the "...