JVC RC-EZ34S Instructions Manual page 19

Presetting stations
You can preset 24 FM and 16 AM stations.
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 3
again.
Note:
In some cases, test frequencies have been already
memorized for the tuner since the factory examined the
tuner preset function before shipment. This is not a
malfunction. You can preset the stations you want into
memory by following the presetting method.
1 Press TUNER/BAND to select the band, FM or
AM.
2 Press 4 or ¢ to tune in the station you want to
preset.
3 Press PROGRAM/CLOCK.
The PROGRAM indicator appears and the preset
number starts blinking in the display window.
4 Press RANDOM/PRESET – or REPEAT/PRESET
+ to select the preset number.
You can use the number buttons on the remote control
unit to select the preset number directly.
Example:
To select preset number 5, press "5".
To select preset number 15, press "1", then "5".
To select preset number 20, press "2", then "0".
Preset number
2 4 3,5 1 4
PUSH
OPEN/CLOSE
REMOTE
STANDBY SENSOR
STANDBY/
ON
FM MODE
EQ HBS
TUNER/
STOP CD BAND TAPE
VOLUME
RANDOM/ PROGRAM/ REPEAT/
PRESET – CLOCK PRESET +
4
STANDBY/
ON
TAPE
RANDOM
5 Press PROGRAM/CLOCK.
The tuned station in step 2 is stored in the preset
number selected in step 4.
Storing a new station on a used number erases the
previously stored one.
6 Repeat steps 2 to 5 to preset other stations, using
different preset numbers.
Tuning in a preset station
1 Press TUNER/BAND to select the band, FM or
AM.
2 Press RANDOM/PRESET – or REPEAT/PRESET
+ repeatedly until the desired preset number
appears.
You can use the number buttons on the remote control
unit to select the preset number directly.
Example:
To select preset number 5, press "5".
To select preset number 15, press "1", then "5".
To select preset number 20, press "2", then "0".
Notes:
• When pressing the number buttons, press the next
button within 3 seconds after pressing the previous
button. Otherwise the unit recognizes the previously
pressed number and sets the preset number.
• If you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days.
If this happens, preset the stations again.
2 1 3,5
MUTING DISPLAY
CD/ / TUNER
PRESET PROGRAM
REPEAT CLOCK
FOLDER EQ
1 2 3
4 5 6
7 8
VOL
9 0
REMOTE CONTROL UNIT
RM-SRCEZ34 A
15