Table of Contents
Advertisement
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product's func-
tions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
NOTE
RS-232C on this monitor is intended to
y
be used with third party RS-232C control
hardware and software. The instructions
below are provided to help with programming
software or to test functionality using telenet
software.
RS-232C connection cables are not supplied
y
with the product.
EXTERNAL EQUIPMENT SETUP
Type of connector;
D-Sub 9-Pin Male
1
6
No.
1
No connection
2
RXD (Receive data)
3
TXD (Transmit data)
4
DTR (DTE side ready)
5
GND
6
DSR (DCE side ready)
7
RTS (Ready to send)
8
CTS (Clear to send)
9
No Connection
47
5
9
Pin name
Advertisement
Table of Contents
