Philips 32PFL5604H/12 Service Manual page 35

6.6 Total Overview SAM modes
Table 6-4 SAM mode overview
Main Menu Sub-menu 1
Hardware Information A. SW VERSION
B. Stand-by processor version e.g. "STDBY_84.69.0.0"
C. Production code
Operation hours
Error
Reset error buffer
Alignment Tuner AGC
White point
Dealer options Picture mute
Virgin mode
E-sticker
Auto store mode
Options Digital broadcast
Digital features
Display
Video reproduction
Alignments
Sub-menu 2 Sub-menu 3
e.g. "Q5431_0.26.10.0"
e.g. "See type plate"
Colour temperature Normal
Warn
Cool
White point red
White point green
White point blue
Red black level offset
Green black level offset
Off/On
Off/On
Off/On
None
PDC/VPS
TXT page
PDC/VPS/TXT
DVB Off/On
DVB - T installation Off/On or Country dependent
DVB - T light Off/On
DVB - C Off/On
DVB - C installation Off/On or Country dependent
Over the air download Off/On or Country dependent
8 days EPG Off/On
USB Off/On
Ethernet Off/On
Wi-Fi Off/On
DLNA Off/On
On-line service Off
PTP (Picture Transfer Protocol) Off/On
Update assistant Off/On
Internet software update Off
Screen 201 / LCD LGD WUE SBA1 37"
LightGuide Off/On
Display fans Not present/Present
Temperature sensor No sensor
Temperature LUT 0
E-box & monitor Off/On
Picture processing None/PNX5100
MOP local contrast Off/On
Light sensor Off/On
Light sensor type 0/1/2/3
Pixel Plus type Pixel Plus HD
Perfect Pixel HD
Pixel Precise HD
Pixel Plus HD (used in Q543.xE)
Pixel Precise HD (used in Q548.1E)
Ambilight None,
2 sided 2/2
2 sided 4/4
3 sided 2/3/2
3 sided 4/3/4
3 sided 4/5/4
4 sided 4/3/4/3
Ambilight technology LED/Future use
MOP ambilight Off/On
Q543.3E LA 6.
Description
Display TV & Stand-by SW version and CTN serial
number.
Displays the accumulated total of operation hours.TV
switched "on/off" & every 0.5 hours is increase one
Displayed the most recent error.
Clears all content in the error buffer.
RF-AGC Take over point adjustment (AGC default
value is 64)
3 difference modes of colour temperature can be se-
lected
LCD White Point Alignment. For values,
see Table 6-1.
Select Picture mute On/Off. Picture is muted / not
muted in case no input signal is detected at input con-
nectors.
Select Virgin mode On/Off. TV starts up / does not
start up (once) with a language selection menu after
the mains switch is turned "on" for the first time (virgin
mode)
Select E-sticker On/Off (USP's on-screen)
Autostore mode disabled (not in installation menu)
Autostore mode via ATS (PDC/VPS) enabled
Autostore mode via ACI enabled
Autostore mode via ACI or ATS enabled
Select DVB On/Off
Select DVB T installation On/Off or by country
Select DVB T light On/Off
Select DVB C On/Off
Select DVB C installation On/Off or by country
Select Over the air download On/Off or by country
Select 8 day EPG On/Off
Select USB On/Off
Select Ethernet On/Off
Select Wi-Fi On/Off
Select DLNA On/Off
On-line service is Off
Select PTP On/Off
Select Update assistant On/Off
Internet software update is Off
Displayed the panel code & type model.
Select LightGuide On/Off
Select Display fans Present/Not present.
N.A
N.A
Select E-box & monitor On/Off
Select Picture processing None/PNX5100 (Q543.xE
chassis).
Select MOP local contrast On/Off
Select Light sensor On/Off
Select Light sensor type form 0 to 3 (for difference
styling).
Select type of picture improvement.
Select type of Ambilight modules use.
For 8400 series only
Ambilight technology LED is in use.
Select MOP ambilight On/Off
EN 35
2010-Jun-29