Advertisement
1.
Disconnect the cable from your vehicle's negative (-) battery
terminal.
2.
To open either fuse holder, unlatch the two latches on the fuse holder
until it springs apart.
3.
Slide off the metal holder on each end of the fuse and remove the
fuse.
4.
If the fuse is blown, replace it.
with the proper rating.
0.5 amps.
The yellow +12V TO BATTERY wire's fuse must be 12 amps.
CAUTION:
The supplied spare fuses have the correct rating. If you
use a fuse with an incorrect rating, the stereo could be
damaged.
5.
Reassemble the fuse holder by squeezing it together until it latches.
6.
Reconnect the cable to the vehicle's negative (-) battery terminal.
Use only standard 1-1/4 inch fuses
The red +12V TO IGNITION wire's fuse must be
Advertisement
