Advertisement
Note:
See "Adjusting the Sound" above for information about changing
the stereo's other settings.
4.
To pause the player, press MUTE ||>.
again to resume play.
5.
Repeatedly press < or > to search for a track.
number appears.
6.
To advance play at high speed to locate a particular section of a
track, hold down > during play.
the current track.
play.
7.
To eject the disc, press /\ and remove the disc from the player.
CAUTION:
To avoid damaging the CD mechanism, do not try to reinsert a
disc while it is in the ejected position.
disc completely, then reinsert.
Note:
If you eject a CD while it is playing but do not remove it from
the CD player, the CD player automatically draws the CD back in
after about 15 seconds.
Shuffle Play
You can set the CD player to randomly select and play tracks from the
loaded CD.
After each track plays, the CD player automatically selects
another track and plays it until you stop shuffle play.
To begin shuffle play, press 1 SHUFF.
Press 1 SHUFF again to resume normal play.
Note:
You can advance to the next track or use audible search during
shuffle play.
Repeat Play
You can set the CD player to repeat a single track on the loaded CD.
To repeat a track, press 2 RPT during play.
play.
When the track ends, it automatically repeats.
To stop repeating the track and resume normal play, press 2 RPT.
disappears.
The display shows the elapsed time or
To reverse play at high speed, hold down < during
SHUF appears during shuffle play.
PAUSE appears.
Press MUTE ||>
The current track
Always remove the
SHUF disappears.
RPT appears during repeat
RPT
Advertisement
