Siemens SIMATIC HMI Operating Instructions Manual page 93

Procedure
Procedure:
1. Remove the clamping element.
2. Slide back the clamping element.
3. Plug the USB memory stick into the port.
4. Slide the clamping element back against the USB memory stick.
5. Turn the clamping elements to secure it.
6. Close the cover flap.
Plugging in a USB line to the Industrial USB Hub 4
The figure below shows a USB line connected to the Industrial USB Hub 4.
①
②
③
④
⑤
⑥
Requirement
The Industrial USB Hub 4 is opened.
Industrial USB Hub 4
Operating Instructions, 09/2007, A5E00471973-02
The port is now exposed so that the USB memory stick can be easily inserted.
Clamping element
Guide
Cable grip
USB line
Spare sealing wedge
Sealing wedge
Mounting and Connecting
4.4 Connecting the Industrial USB Hub 4
95