Buttons - Fluke 51 II Series User Manual

info@Fluke-Direct.com

Buttons


Press  to turn the thermometer on or off.

 
Press , (CANCEL) to stop displaying the minimum, maximum, and average readings in the
secondary display.
(Shift
function)

Press  to turn the backlight on and off. The backlight turns off after 2 minutes without any button
presses. If the battery is low, the backlight is disabled.

Press  to step through the maximum, minimum, and average readings. When viewing logged
readings, shows the maximum, minimum, and average of the logged readings.
 
Press , (CANCEL) to turn off this display.

Press  to switch between Celsius (
 Press  to freeze or unfreeze the displayed readings.
Press  when turning on the thermometer to test the display. All display elements appear.
 
Model 52: Press to toggle showing the T1, T2, and T1-T2 (differential temperature measurement) in the
primary or secondary display.
Fluke-Direct
Table 5. Buttons
o o
C), Fahrenheit ( F), and Kelvin (K).
51 & 52 Series II
Getting Started
7
.com
1.888.610.7664