Grandstream Networks DP752 Administration Manual page 88

In the example below; the 1
incoming call will be sent to HS2 since previous call was answered by HS1 and HS2 is the next available
Handsets in the list; 3
rd
busy making an outgoing call (if HS3 was available, the call will be sent to HS3).
st
1
1 st
2 nd
3 rd
▪ Linear: The base station will distribute calls in predefined order from the lowest-numbered available
Handsets, if no answer within ring timeout, the call will be sent to next available Handsets in sequence.
This mode is also called "serial hunting".
In the example below; all Handsets are available, the incoming call will be sent to HS1 since it's the
lowest-numbered available Handsets, if no answer within ring timeout, the call will be sent to HS2 since
it's the next available lowest-numbered Handsets, and same applies for HS3 and etc.
Incoming Call
st incoming call was sent to HS1 since all Handsets were available; 2
will be sent to HS4 since HS2 was the last one answering the call and HS3 is
rd
3 Incoming Call
nd
2 Incoming Call
Incoming Call
HS 1
Available Available
Incoming Call
Ringing
No Ring
Incoming Call
No Ring
Incoming Call
No Answer No Answer
HS 2
HS 1
Available Available
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
HS 2 HS 3 HS 4
Available
Available
No Ring
No Ring No Ring
No Ring
Ringing No Ring
No Ring Outgoing Ringing
Call
No Answer
No Answer
HS 4
HS3
Available
Available
nd
HS 5
Available
No Ring
No Ring
No Ring
HS5
Available
P a g e | 88