Grandstream Networks DP752 Administration Manual page 67

Enable Handset
Config Upgrade
Handset Config File
Prefix
Handset Config File
Postfix
Allow DHCP Option
43 and Option 66 to
Override Server
Allow DHCP Option
120 to Override SIP
Server
3CX Auto Provision
Automatic
Provisioning
Random Interval
Start Time
Random Interval
Stop Time
Hour of the Day (0-
23)
Day of the Week (0-
6)
Checks to allow Handsets config upgrade for Handsets related settings.
Default is No.
If configured, only the Handsets configuration file with the matching encrypted
prefix will be downloaded and flashed into the device. Default prefix is ipei_
If configured, only the Handsets configuration file with the matching encrypted
postfix will be downloaded and flashed into the device.
Obtains configuration and upgrade server's information from DHCP server
using options 66 and 43.
Note: If DHCP Option 66 is enabled, the DP752 will attempt downloading the
firmware file from the server URL provided by DHCP, even though Config
Server Path is left blank.
Obtains configuration and update SIP server information from DHCP server
using options 120.
Note: If DHCP option 120 is enabled, the sip server setting can be changed
for profile 1.
Sends multicast "SUBSCRIBE" message for provisioning at booting stage,
used for PnP (Plug-and-Play) configuration. Default is Yes.
Specifies when provisioning process will be initiated:
• No: Base station will only request configuration files once at boot up.
• Yes, check for provisioning at random every X day(s): Specify a period
in days.
• Check for provisioning every X minute(s): Specify a period in minutes.
• Check for provisioning every day: Specify "Hour of the day (0-23)".
• Check for provisioning every week: Specify "Hour of the day (0-23)" and
"Day of the week (0-6)". Note: Day of week is starting from Sunday.
Default is No.
Starting time for random interval in hours (0-23): minutes (0-59).
Stopping time for random interval in hours (0-23): minutes (0-59).
Defines the hour of the day to check the HTTP/TFTP server for configuration
file changes. Default is 1.
Defines the day of the week to check HTTP/TFTP server for configuration file
changes. Default is 1.
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
P a g e | 67