Grandstream Networks DP752 Administration Manual page 47

Network Status
MAC Address Shows Device ID in hexadecimal format. This is needed by network administrators
for troubleshooting. The MAC address will be used for provisioning and can be
found on the label on original box and on the label located on the bottom panel of
the device.
IP Address Mode Indicates used IP address mode: DHCP, Static IP or PPPoE.
IP Address Displays assigned IP address. Example: 192.168.5.110
Subnet Mask Displays assigned subnet mask.
Example: 255.255.255.0
Gateway Displays assigned default gateway.
Example: 192.168.5.1
PPPoE Link Up Indicates PPPoE connection status.
Primary DNS Shows assigned Primary DNS server address. Example: 8.8.8.8
Secondary DNS Shows assigned Secondary DNS server address. Example: 8.8.4.4
NAT Traversal Indicates type of NAT for each Profile. (Based on STUN protocol.)
System Info
Product Model Displays product model info. Default is DP752.
Part Number Shows product part number. Example: 9610006512A (last 2 digits show HW
version, in this example 12A for HW version 1.2A)
Software Version
System Up Time Indicates system uptime since last reboot.
System Time Shows actual time and date according to your configuration.
Service Status Reveals status of VoIP applications.
•
Firmware Status: Displays the status of the firmware loaded.
•
Boot: Specifies Boot version.
•
Core: Specifies Core version.
•
Base: Specifies Base version.
•
Prog: Specifies Prog version. This is the main firmware release number,
which is always used for identifying the software system of the DP752.
•
Locale: Specifies Locale version.
•
Recovery: Specifies Recovery version.
•
Handset: Specifies Handset firmware version.
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
P a g e | 47