Summary of Contents for Audiovox Digital Compact Hi-Fi System CE510S
Page 1
SPECIFICATIONS RADIO SECTION Frequency Range FM: 88 ~ 108 MHz AM: 530 ~ 1700 KHz CASSETTE SECTION Track system Compact cassette stereo Recording System AC Bias Tape Normal Frequency Response 100 – 8000 Hz CD SECTION Sampling Frequency 44.1 KHz Frequency Response 20 Hz - 20 KHz GENERAL...
SAFETY INSTRUCTIONS - Read before operating equipment This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Read Instructions – All the safety and operating instructions should be read before the appliance is operated.
PREPARATIONS AND CONTROLS PREPARATIONS 1. Carefully unpack the unit and speakers. Remove all packing material from around the unit. 2. Locate the unit horizontally on a heavy duty stand or firm level surface and away from the speaker system to avoid acoustic feedback. CONNECTIONS 1.
COMPACT DISC OPERATION PLAYING A CD 1. Press the POWER button [8] once to turn the unit on. 2. Set the FUNCTION switch [9] to “CD” mode. 3. Place a compact disc on the spindle, label side up. A 3” (8cm) disc may also be played without an adaptor.
STOP THE PLAY MODE Simply press the STOP button [4] to stop the play mode. TAPE OPERATION GENERAL INFORMATION ON CASSETTE TAPES • For playback, use normal (low-noise) tape for best sound. (Metal or chrome tape is not recommended.) • For recording, use normal tape only.
COMPACT DISC OPERATION CONCERNING COMPACT DISCS 1. Usable compact discs Use a compact disc bearing the mark as shown. 2. Notes on handling discs • Removing the disc from its storage case and loading it. Press the claws at the center of Insert with the label facing up.
OPERATION OF REMOTE CONTROL UNIT LOADING BATTERIES 1. Remove the battery compartment cover. 2. Insert 2 “AAA” size (R03) batteries as indicated by the polarity marking. (Placing the batteries in the wrong way around cause malfunction.) 3. Close the battery compartment cover. OPERATION PROCEDURE Plug the power cord of the system into an AC wall outlet, and press the POWER ON/ STAND BY button on the remote control unit to turn the power on.