Acura Music Link 08A28-1H1-800 Installation Instructions Manual page 4

9. Attach four pieces of masking tape to protect the
center console in the area shown.
VEHICLE
CONNECTORS (9)
CENTER
MASKING TAPE
CONSOLE
10. Remove the audio unit (four bolts). Pull the audio
unit out and unplug the nine vehicle connectors.
11. Get the Music Link harness. Measure and mark
the Music Link harness at the location shown
using a felt-tip pen.
FELT-TIP PEN
MARK
4 of 7
BOLTS (4)
AUDIO UNIT
MUSIC LINK
HARNESS
700 mm
12. Insert the Acura Music Link unit into the holder
cushion.
HOLDER
CUSHION
5N14071S
13. Plug the bus cable DIN connector (black) and the
Music Link harness DIN connector (white) into the
Music Link unit.
NOTE: To avoid connector damage, orient the
connectors properly with the flat side up, and
insert them straight in (not crooked). To remove,
pull back on the slide collar to release a locking
mechanism. Do not pull on the cable, or you can
damage it.
BUS CABLE
DIN CONNECTOR
(BLACK)
5N15011S
Upside
BII 32726-34939 (0703)
ACURA
MUSIC LINK
UNIT
Align ends.
ACURA MUSIC
LINK UNIT
MUSIC LINK
HARNESS DIN
CONNECTOR
(WHITE)
Upside
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
6905090B
6903010H