Sony GTK-XB72 Help Manual page 22

Perform the pairing procedure on the BLUETOOTH device to detect the system.
3
When a list of detected devices appears on the display of the BLUETOOTH device, select [GTK-XB72].
*
If a passkey is required on the display of the BLUETOOTH device, enter [0000].
*
The passkey may also be called a "passcode," "PIN code," "PIN number" or "password."
Make the BLUETOOTH connection from the BLUETOOTH device.
4
When the BLUETOOTH connection is established, you hear the voice guidance ("Bluetooth Connected") and the
(BLUETOOTH) indicator switches from flashing to a steady state.
If the BLUETOOTH connection is not established, repeat from step
Hint
For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.
Note
For Apple iOS devices, the system is compatible with iOS 10.0 or later.
The pairing mode of the system is released after about 5 minutes and the
when pairing information is not stored in the system, such as at the factory settings, the pairing mode is not released. If the
pairing mode is released before finishing the process, repeat from step
Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The system is already paired with 8 devices and another device is to be paired.
The system can be paired with up to 8 devices. If a new device is paired after 8 devices have already been paired, the device
that was paired earliest is replaced by the new one.
The pairing information of the system has been deleted from the BLUETOOTH device.
After you reset the system, it may not be able to connect with your iPhone/iPod. In this case, delete the pairing information of
the system on your iPhone/iPod, then perform the pairing operation again.
The system can be paired with multiple devices, but can only play music from one paired device at a time.
.
(BLUETOOTH) indicator flashes slowly. However,
.
22