Additional Programme; Settings; G/F Speedperfect/Ecoperfect; Easy-Iron - Bosch WAU28490AU Instruction Manual And Installation Instructions

Additional programme settings
en
\

Additional programme

settings

You can find possible additional
Note:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
G/F SpeedPerfect/
EcoPerfect
Button with two possible settings for
adapting the selected programme:
G SpeedPerfect
■
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected
programme, without the

G/F SpeedPerfect/EcoPerfect

setting.
Do not exceed the maximum
Note:
load.
F EcoPerfect
■
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
programme, without the
G/F SpeedPerfect/EcoPerfect
setting.
Select the button to do this. First of all,
you can select the G SpeedPerfect
setting. If you select the button again,
the F EcoPerfect setting is active. The
respective symbol is shown in the
display when the setting is activated.
If you select the button again, no setting
is active.
32
p Easy-Iron
Reduces creasing by means of a
special spin sequence followed by
fluffing and reduced spin speed.
Touch p Easy-Iron and activate or
deactivate it.
If p Easy-Iron has been
Note:
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
ë Water/Rinse Plus
Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.
Longer programme duration.
Meanwhile the water level is raised
during washing process for better
soaking performance and gentler
treatment of the laundry.